High Barrier Automatic Blow Moulding Machine For Agricultural Chemical Bottle

Multi- layers High Barrier Agricultural Chemical Bottle Blow Moulding Machine

Introduction:

MP90FS IML is specifically designed for making bottles from 600ml up to maximum 10L. It is hydraulic driven with accrate eletrical control system. MP90FS IML has single stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP90FS IML is updated to be one of the most reliable and popular model in the world.

Adjusting of placing rack

If head central line and chamber central line are not in parallel and superposition after the above mentioned methods. It is necessary to adjust placing rack as follow:

First loose one of the two fixing nuts in the back of placing rack oil cylinder and then tighten the other nut. Move the whole mould rack forwards or backwards. Its moving position is dependent on gap of chamber central line away from head center. Finally tighten fixing nuts.

Adjusting of qualification products

Adjusting of product weigh.Usually adjust the gap between core mould and gate mould at material outlet under head. The bigger of the gap, the more of the material and the heavier of the product. Contraliwise, lighter. That is to say, the core mould which disperses head moves up, less material comes out because of less gap and the product is light. Contraliwise, heavier. The core mould which collects head moves up, more material comes out because of bigger gap and the product is heavy. Contraliwise, lighter. This operation should be conducted during extrusion stop.