Ningbo Qiming Machinery Manufacturing Co., Ltd.
Ningbo Qiming Machinery Manufacturing Co., Ltd. Global blow molding machine & injection molding machine solution supplier
Add to Cart
Multi- layers High Barrier Farm Chemical Bottle Blow Moulding Machine
Introduction:
MP90FS IML is specifically designed for making bottles from 600ml up to maximum 10L. It is hydraulic driven with accrate eletrical control system. MP90FS IML has single stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP90FS IML is updated to be one of the most reliable and popular model in the world.
Adjusting of placing rack
If head central line and chamber central line are not in parallel and superposition after the above mentioned methods. It is necessary to adjust placing rack as follow:
1) First loose one of the two fixing nuts in the back of placing rack oil cylinder and then tighten the other nut. Move the whole mould rack forwards or backwards. Its moving position is dependent on gap of chamber central line away from head center. Finally tighten fixing nuts.
2) Remove all approach switches of rack up and down so that approach switches can not induce when placing rack moves to its limit up and down. After that, manually make placing rack move up and down and stop it at up stop. Then check again whether head central line and chamber central line are in parallel and superposition.
| Parameters | MP90FS |
| Material | PE PP PVC PA… |
| Max container capacity | 10L |
| Number of die | 1,2,3,4,6,8 |
| Machine Dimension(LxWxH) | 5x5.9x3.1m |
| Total weight | 12ton |
| Clamping force | 350kN |
| Platen openning stokes | 240-560mm |
| Toggle stokes | 1150mm |
| Max mould size(WxH) | 1100x430mm |
| Screw diameter | 90mm |
| Screw L/D ratio | 24 L/D |
| (HDPE) Plasticizing capacity | 150kg/h |
| Screw heating zone | 4 zone |
| Screw heating power | 16.5kw |
| Screw fan power | 0.14kw |
| Extrusion motor power | 45kw |
| Die head heating zone | 16 zone |
| Power of die heating | 21kw |
| Total power of machine | 160kw |
| Power of oil pump motor | 31kw |
| Air pressure | 0.6-0.8 Mpa |
| Average energy consumption | 80kw |
| Consumption compression air | 1.5m³/min |
| Consumption cooling water | 150L/min |