Ningbo Qiming Machinery Manufacturing Co., Ltd.
Ningbo Qiming Machinery Manufacturing Co., Ltd. Global blow molding machine & injection molding machine solution supplier
Add to Cart
10ml-1L HDPE Extrusion Blow Molding Machine Fully Automatic MP55D for Eye Drop Bottle
Introduction:
MP55D is specifically designed for making bottles from 5ml up to maximum 1L. It is hydraulic driven with accrate eletrical control system. MP55D has double stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP55D is updated to be one of the most reliable and popular model in the world.
Advantages:
EXTRUSION DIE HEAD: HIGHLY EXPERIENCED MULTI-CAVITY AND MULTI-LAYER TECHNOLOGY
Adopting with latest die head design, MEPER focuses on providing high quality and high precision self-manufactured extrusion die heads for customers.
CONTROL SYSTEM: HIGHLY OPTIMIZED USER-FRIENDLY CONTROL TECHNOLOGY
All MEPER machines is equipped in standard with easy operational TECHMATION control system or optional with B&R control system. MOOG Parison Control is also optional based on different requirements.
Cylinder of carriage, cylinder of clamping, cylinder of blow pin, please be according to chapter one’s figure to change parts and all seal rings
Step: 1. unscrew hexagon nut, take down 4 pcs tie bars; 2.remove barrel cover and clamp cover, take down barrel, take out piston rod. check which part is broken or seal ring is broken. Then change. After finishing, please install clamp cover and barrel cover, put barrel, then put piston rod, please note of sealing between barrel and barrel cover, the balance between piston rod and barrel. Then install tie bar, after finishing, please screw the nut and screw down.
Specifications:
| MP55D | ||||
| Double station blow molder with horizontal linear mould shuttle | ||||
| Length: | 2870mm | |||
| Width: | 2140mm | |||
| Height: | 2280mm | |||
| Key Data | MP55D | |||
| mm | ||||
| Linear mould stroke | A | 380 |  | |
| Mould Width | B | 360 | ||
| Mould Length | C | 300 | ||
| Mould Thickness | D | 130 | ||
| Opening Stroke | E | 220 | ||
| Platen Daylight | D+E | 350 | ||
| Clamping Force | 30kN | |||
| Centre Distance | 2x2 fold | 130 | ||
| 2x3 fold | 90 | |||
| 2x4 fold | 75 | |||
| 2x5 fold | 60 | |||
| 2x6 fold | 50 | |||
| Extruder | φ55 | φ60 | φ65 | |
| Screw Speed | r/min | 0~65 | 0~65 | 0~65 |
| Screw Diameter | mm | 55 | 60 | 65 |
| Screw L/D Ratio | L/D | 24 | 24 | 24 |
| Energy Requirements | ||||
| Extruder Inverter Power | kW | 11 | 15 | 18.5 |
| Extruder Moter Power | kW | 11 | 15 | 18.5 |
| Srew Heating Power | kW | 5.85 | 9.4 | 12.3 |
| Fan Power | kW | 0.14X2 | 0.14X2 | 0.14X2 |
| Oil pump Motor Power | kW | 7.5 | 7.5 | 7.5 |
| Total Power of Machine | kW | 33.34 | 40.92 | 47.29 |
| Air Requirement approx | m3/min | 0.8-1 | 0.8-1 | 0.8-1 |
| Air Working Pressure | Mpa | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
| Cooling Requirements | ||||
| Consumption Cooling Water | L/min | 30 | 30 | 30 |