Ningbo Qiming Machinery Manufacturing Co., Ltd.
Ningbo Qiming Machinery Manufacturing Co., Ltd. Global blow molding machine & injection molding machine solution supplier
Add to Cart
2ml-20ml HDPE Extrusion Blow Molding Machine MP55D for Medical Water Bottle
Introduction:
MP55D is specifically designed for making bottles from 5ml up to maximum 1L. It is hydraulic driven with accrate eletrical control system. MP55D has double stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP55D is updated to be one of the most reliable and popular model in the world.
Advantages:
EXTRUSION DIE HEAD: HIGHLY EXPERIENCED MULTI-CAVITY AND MULTI-LAYER TECHNOLOGY
Adopting with latest die head design, MEPER focuses on providing high quality and high precision self-manufactured extrusion die heads for customers.
1 Pressure of hydraulic system should be adjusted properly according to action requirements. Reasonable use of pressure can save power and prolong service life of machine. Position of each limit switch should be adjusted according to moulding product. Especially switch point from mould clamping to rack placing should be paid attention, otherwise molding filling will be deficient or too high vibration comes into being.
2 No high rotation speed of screw is allowed in case of no material in screw or barrel ( less than 20r/min is better). After material is filled in screw channel, then speed up the screw rotation until required value is got, in order to avoid scratch to screw and barrel because of high speed or long time idle rotation.
Specifications:
| MP55D | ||||
| Double station blow molder with horizontal linear mould shuttle | ||||
| Length: | 2870mm | |||
| Width: | 2140mm | |||
| Height: | 2280mm | |||
| Key Data | MP55D | |||
| mm | ||||
| Linear mould stroke | A | 380 |  | |
| Mould Width | B | 360 | ||
| Mould Length | C | 300 | ||
| Mould Thickness | D | 130 | ||
| Opening Stroke | E | 220 | ||
| Platen Daylight | D+E | 350 | ||
| Clamping Force | 30kN | |||
| Centre Distance | 2x2 fold | 130 | ||
| 2x3 fold | 90 | |||
| 2x4 fold | 75 | |||
| 2x5 fold | 60 | |||
| 2x6 fold | 50 | |||
| Extruder | φ55 | φ60 | φ65 | |
| Screw Speed | r/min | 0~65 | 0~65 | 0~65 |
| Screw Diameter | mm | 55 | 60 | 65 |
| Screw L/D Ratio | L/D | 24 | 24 | 24 |
| Energy Requirements | ||||
| Extruder Inverter Power | kW | 11 | 15 | 18.5 |
| Extruder Moter Power | kW | 11 | 15 | 18.5 |
| Srew Heating Power | kW | 5.85 | 9.4 | 12.3 |
| Fan Power | kW | 0.14X2 | 0.14X2 | 0.14X2 |
| Oil pump Motor Power | kW | 7.5 | 7.5 | 7.5 |
| Total Power of Machine | kW | 33.34 | 40.92 | 47.29 |
| Air Requirement approx | m3/min | 0.8-1 | 0.8-1 | 0.8-1 |
| Air Working Pressure | Mpa | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
| Cooling Requirements | ||||
| Consumption Cooling Water | L/min | 30 | 30 | 30 |